Hakko Electronics Monitouch V Series, Reference Manual

Page: 625 / 746

Chapter 25 Memory Card Mode
25-16
Memory Card Mode
[Memory Card] Dialog
♦
[Main] Tab Window
[Division No.]
In one division, only one memory card mode can be registered. Each of the
base screen and overlaps 0 to 2 can contain one memory card mode.
[Memory]
When editing or transferring data stored in the memory card between V
series and PLC, this memory address is used for controlling the process.
The allocation of memory is shown below.
•
A. n (RCV_FLAG)
A maximum of four memory card mode parts can be set per screen.
Memory Memory Name Function
n RCV_FLAG Mode operation command
n + 1 RCV_FILENo File number designation PLC
→
V
n + 2 RCV_RECDNo Record number designation
15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 00
0 0 0 0 0
MSB LSB
Record name edit
prohibited
File name edit prohibited
Card No./name edit prohibited
Format prohibited
Data transfer prohibited
Record lock
File lock
File selection
Quick selection
Transfer from V series
→
PLC
Transfer from PLC
→
V series
Bit No. Contents Description
0 Record name edit prohibited Record name edit is prohibited.
1 File name edit prohibited File name edit is prohibited.
2
Card No./name edit
prohibited
Card number and name edit is prohibited.
3 Format prohibited Memory card formatting is prohibited.
4 Data transfer prohibited Data transfer between the memory card and the PLC is prohibited.
5 to 7 Not used These bits must be reset to “0.”
8 Record lock The use of [Record Select] switch is prohibited.
9 File lock The use of [File Select] switch is prohibited.