![background image](http://html1.mh-extra.com/html/hakko-electronics/monitouch-v-series/monitouch-v-series_reference-manual_3315280204.webp)
Chapter 7 Entry Mode
7-13
7
En
try
D
ial
og
Se
ttin
g
- Entry target selection (bit 12)
This bit becomes active when [Lines/Columns Output] is checked in the
[Detail] tab window of the [Entry] dialog.
0:
Data display part is selected
1:
Table data display part is selected
- Input (bit 14)
The input status of the entry mode is displayed on the top screen (of the
base screen or overlap 0 to 2).
0:
Input is not possible.
1:
Input is possible.
- Writing completed (bit 15)
When the ENT key is pressed, data is written to memory, and this bit is
set to “1” (ON). This bit remains set (ON) until the cursor moves to a
different data display part.
- Line number/Column number (n + 1)
This bit becomes active when [
Lines/Columns Output] is checked in
the [Detail] tab window of the [Entry] dialog. The line and column
numbers of the selected table data cell are output.
- Block number
These bits become active when [Block] is chosen for [Type]. The block
number currently displayed is written.
- Entered data
When [Output Memory] is chosen for [Target Memory], data is written.
Numerical data entry:
2 words are used
Character data entry:
(The number of bite/2) words are used.
[
Reverse]
The data display part currently selected by the cursor as the entry target is
reversed.
[Target Memory]
When the ENT key is pressed, the target memory of the data is specified.
•
Direct
Memory for the entry target
•
Output Memory (= [Info. Output Memory])
Numerical data entry: [Info. Output Memory] n + 2, n + 3
Character data entry: [Info. Output Memory] n + 2 to (The number of byte/2)
word
The number of characters here is based on one-byte codes. Two one-byte characters
occupy one word. Therefore, the number of words occupied can be calculated by
dividing the number of characters by 2. If there is a remainder, it occupies one word.
Ex.: 3 characters = 2 words
When [Enlarge Y] of the [Entry Target] data display is more than [4] (64 dots),
the [Reverse] is not displayed normally.
Summary of Contents for Monitouch V Series
