Hakko Electronics Monitouch V Series, Reference Manual

Page: 424 / 746

Chapter 13 Macro
13-41
13
Interv
al
Tim
e
r
Graphic Library Edit (Example: GNo. 0 & No. 0)
Place the following graphic on the screen, and specify the X parameter.
Macro Block Edit (Example: Macro Block No. 1)
Line No. 0 $u00101 = $ 1(W)
Line No. 1 IF ($u00101 = 640) LB00 (W)
Line No. 2 RET
Line No. 3 LB00:
Line No. 4 $u00101 = 0(W)
Transfer the above screen data to the V series for check.
Graphic No. 0 in group No. 0
Pattern No. 0
Parameter Setting
[Action: Animate]
[Start X: Incre 1]
(Incremental input in the
minus direction 1)
The above is the setting for a macro block to modify the X parameter for the graphic
start point. When the count on the X-axis has been increased to 640 dots (maximum),
the count is cleared and then is increased again. The graphic is moved from the right to
the left by this process.