![background image](http://html1.mh-extra.com/html/hakko-electronics/monitouch-v-series/monitouch-v-series_reference-manual_3315280553.webp)
Chapter 23 CF Card (V7 Only)
23-8
♦
When Connecting to the V7 Series:
In the V7 series, CF card interfaces are implemented as standard.
All you need to prepare is a CF card.
Notes
When using a CF card, note on the following:
•
If there should be a disk error and you cannot read/write data, you can scan
the disk in Windows to restore the disk data. If you still cannot restore the
disk data, you need to format the CF card. (For more information on
scanning the disk or operating Windows, refer to the Windows manual.)
•
Back up your data periodically. This will protect you in the case the above
error occurs and you cannot restore data.
•
If you turn off or reset the V7 series or insert/remove the CF card, during
access to the CF card, the data on the CF card could be corrupted. Check
that you are not transferring data to the CF card before inserting/removing a
CF card in the RUN mode.
* However, you can insert/remove the card on the “Main Menu” screen.
•
You can write to a CF card about 300,000 times.
If you write to a CF card in a short cycle, it can reduce the card’s lifetime.
When using a CF card to save sampling data, be aware of the sampling time.
(
Refer to page 23-19.) Be sure to always avoid writing to a CF card
with the CYCLE macro command.
•
Note that the amount of the data to be written should not exceed the memory
capacity of the CF card. Especially when you use functions to write data
from the V7 series to a CF card, such as saving screen data, screen images,
or recipe data, you need to be careful about the capacity limit of the CF card.
For more information on checking the free CF card space, refer to page
23-54.
•
If the screen data for which the CF card function is used is on the V7 series,
be sure to insert the CF card before operating the screen.
96
MB
CompactFlash Card
F1
F2
F3
F4
F5
F6
F7
SYSTEM
POWER
Trend sampling
V7 series
Insert a CF card.
Reading/writing data
is supported.
Summary of Contents for Monitouch V Series
