Hakko Electronics Monitouch V Series, Reference Manual

Page: 285 / 746

Chapter 9 Graphic Display
9-10
[Graphic Relay] Dialog
[Division No.]
Specify the division number. ( For information on the division number,
refer to Chapter 2 in the Reference Manual (Operation).)
[Memory]
Specify the command memory that is used to display the registered graphics
or texts on the screen. Here, graphics starting from [Start Graphic GNo &
No] are automatically allocated to the bits of the memory. Memory allocation
varies depending on the setting for [Type], [Number of Relays] and
[Parameter] described in the next section. For more information, refer to the
explanation for [Start Graphic].
[Type]
Select how you will display graphics.
•
[1-Graphic]
When the memory bit is set (ON), the corresponding graphic is displayed;
when it is reset (OFF), the graphic disappears.
•
[2-Graphic]
When the memory bit is set (ON), the ON graphic is displayed; when it is
reset (OFF), the OFF graphic is displayed. A graphic is always displayed
whether the bit is set or reset.
[Mode]
Select the display mode when changing the graphics at bit activation or
deactivation. When [2-Graphic] is chosen for [Type], this option becomes
active. In the case of [Type: 1 Graphic], the mode is fixed to [XOR].