Hakko Electronics Monitouch V Series, Reference Manual

Page: 61 / 746

Chapter 1 System Setting
1-24
[ Use ON Macro]
Check this option when you would like to execute a macro command when
the function switch is pressed. Check the box and click the [ON Macro Edit]
button. The macro edit window is displayed. Set the desired macro
command.
[ Use OFF Macro]
Check this option when you would like to execute a macro command when
the function switch is released. Check the box and click the [OFF Macro
Edit] button. The macro edit window is displayed. Set the desired macro
command.
[ Interlock]
Set interlock for each function switch. If it is checked, the following setting
items become active.
•
[Memory]
Set the memory address for interlock.
•
[Condition ([ON]/[OFF])
Choose the condition to be raised with data in the memory address set for
[Memory].
•
[When the switch is OFF] ([Effective]/[Ineffective])
Select whether interlock memory should be valid or invalid during switch
deactivation when [Momentary (Momentary W)] is selected for [Action].
[Ineffective] is recommended.
Buffering Area Setting
Make the setting when using the sampling mode.
Memory Card Setting
Make the setting when using the memory card mode or data logging function.
For information on macro commands, refer to “Chapter 13 Macro.”
For information on macro commands, refer to “Chapter 13 Macro.”
Some setting items are common with those for the ordinary switch function. For more
information on other setting items not mentioned above, refer to “Chapter 3 Switch.”
For more information, refer to “Chapter 10 Sampling.”
For more information, refer to “Chapter 25 Memory Card Mode.”