Hakko Electronics Monitouch V Series, Reference Manual

Page: 543 / 746

Chapter 22 Data Logging
22-14
When Storing to CREC:
This section describes setting items for data logging. It assumes that you have
already set the sampling mode. For more information on the sampling mode,
refer to “Chapter 10 Sampling.”
Setting Procedure
Setting items are as follows:
Buffering Area Setting and Memory Card Setting
When using a SRAM memory card (CREC/memory card socket), be sure to
select [Store Target: SRAM] in the [Buffering Area Setting] dialog. The editor
recognizes [Output File No.] that you specify, identifies [No.] of the appropriate
memory card setting, and automatically sets [Type: Buffering File].
System Setting Buffering Area Setting
•
Automatically set
[Type] of the same
number.
No
No. 0 (to 11)
Use Sample Buffer
Yes Store Target
Output File No.
SRAM
n (0 to 15)
System Setting Memory Card Setting
•
No. 0 (to 15)
I/F Memory
Type Buffering File
Screen Edit [Memory Card Mode] icon
•
Memory card mode tool bar
Detail (Memory Card)
Format Switch
Main
Division No.
Memory
* When you insert a SRAM memory card into a memory card socket (supported by V610/V612 option type), instead of
using CREC, you do not need the settings listed above.
System Setting Modular Jack
•
Modular Jack 2 (Modular Jack 1) Memory Card
*