Hakko Electronics Monitouch V Series, Reference Manual, Page: 137 / 746

Chapter 4 Lamp
4-12
♦
Color
•
Frame color (ON/OFF), ON color, OFF color
Specify the desired colors in the [Color] tab window. The specified colors are
used. The same frame color is used when the lamp is ON and OFF.
(
Refer to page 4-7.)
•
OFF text color
Specify the desired color in the [Character] (OFF) tab window. The specified
color is used. (
Refer to page 4-5.)
•
ON text color
Specify the desired color in the [Character] (ON) tab window. The specified
color is used.
Part file: Std.V7P / Std.V6P (No. 0000, 0004 and later)
Parts_j.V7P / Parts_j.V6P (No. 0004 and later)
Almost the same as part No. 0 to 3 ( Refer to page 4-11.)
Different points:
•
ON frame color/ON color
Specify the desired colors in the [Color] (ON) tab window. The specified
colors are used. A color different from the OFF color can be set.
•
For P3 to P8, the specified colors are shown in the preview image.
♦
Notes on REP
•
When the OFF text color and the ON color are the same, the text cannot be
shown when the lamp is turned on.
•
When text is entered as graphics, it is not displayed when the lamp is turned
on. Once the lamp is turned on, the text is not displayed unless the screen is
changed.
RUN
RUN
RUN
The text is not displayed when the lamp is once turned on.
The text is displayed by opening the screen again.
Place text graphics.
Initial OFF state ON state OFF state