manualshive.com logo in svg

Hakko Electronics Monitouch V Series, Reference Manual

The Hakko Electronics Monitouch V Series offers advanced human-machine interface solutions. For a comprehensive understanding of its features and functions, download the Reference Manual for free from our website. This manual provides detailed instructions on how to maximize the benefits of this innovative product in just a few clicks.

Share
Download
background image

Contents

14

MR400 Format Table (Call Setting)..........................................................................15-11

♦

Setting Example 1 .........................................................................................15-12

♦

Setting Example 2 .........................................................................................15-12

Macro........................................................................................................................15-14

♦

[MR_REG].....................................................................................................15-14

♦

[MR_OUT] .....................................................................................................15-15

♦

Barcode Type “CODE 39” ............................................................................. 15-15

Chapter 16 Barcode

Outline ................................................................................................................................ 16-1
Barcode Setting ..................................................................................................................16-2

[Barcode Setting] Dialog.............................................................................................16-2

♦

I/F Memory ...................................................................................................... 16-4

Barcode Setting Example ...................................................................................................16-5
Connecting MONITOUCH and Barcode Reader ................................................................16-6

Chapter 17 Animation (V7 Only)

Outline ................................................................................................................................ 17-1
Setting Items for Animation ................................................................................................ 17-2
Structure of Animation ........................................................................................................17-3
Registration of Animation ...................................................................................................17-4

[Animation] Area .........................................................................................................17-4

♦

Setting Procedure ...........................................................................................17-4

Frame Edit ..................................................................................................................17-7
To Check the Registered Contents:  .......................................................................... 17-8

♦

[Test] Field ...................................................................................................... 17-8

[Animation] Dialog ..............................................................................................................17-9

[Main] Tab Window..................................................................................................... 17-9
[Animation Table] Tab Window................................................................................. 17-12

♦

[Display] Field................................................................................................17-13

Notes on Animation ..........................................................................................................17-16

About Transparency .................................................................................................17-16

♦

Transparent Color Setting ............................................................................. 17-16

♦

Transparent Color Setting for the Screen ..................................................... 17-17

Structure of Layers ................................................................................................... 17-18
 Limitations ............................................................................................................... 17-19

Example of the Animation Setting ....................................................................................17-20

Chapter 18 Video Display (V7i Only)

Outline ................................................................................................................................ 18-1

Easy Display by Connecting to Video......................................................................... 18-1
Superimpose ..............................................................................................................18-2
Up to Four Channels are Available to Display Simultaneously .................................. 18-2
Snap Function ............................................................................................................18-3
JPEG Display .............................................................................................................18-4
Double-click Operation ............................................................................................... 18-4

Setting Items for Video Display .......................................................................................... 18-5
Video Setting ...................................................................................................................... 18-5

Summary of Contents for Monitouch V Series











































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Monitouch V Series

GE Druck PACE1000 Safety Instructions And User Manual preview
Druck PACE1000
Brand: GE Pages: 148
Transtech PQI 301 Operator'S Handbook Manual preview
PQI 301
Brand: Transtech Pages: 36
Elo Touch Solutions ESY15i2 User Manual preview
ESY15i2
Brand: Elo Touch Solutions Pages: 45
EBN Technology TM60-2B-LR User Manual preview
TM60-2B-LR
Brand: EBN Technology Pages: 16
AMX AXD-MLC Dimensional Drawing preview
AXD-MLC
Brand: AMX Pages: 1
Skipper CU-M001-SA User Manual preview
CU-M001-SA
Brand: Skipper Pages: 40
JinkoSolar JKMxxxM-60 Series User Manual preview
JKMxxxM-60 Series
Brand: JinkoSolar Pages: 24
Link Energy Jupiter Series Installation Manual preview
Jupiter Series
Brand: Link Energy Pages: 30
Digital Electronics Corporation PL6900-T42 Installation Manual preview
PL6900-T42
Brand: Digital Electronics Corporation Pages: 16
JHCTech ALAD-K2120T(P) User Manual preview
ALAD-K2120T(P)
Brand: JHCTech Pages: 70
Dover MG586 Operation Setup Maintenance preview
MG586
Brand: Dover Pages: 30
IAI TB-02 Instruction Manual preview
TB-02
Brand: IAI Pages: 420
i3-TECHNOLOGIES i3TOUCH PX Quick Start Manual preview
i3TOUCH PX
Brand: i3-TECHNOLOGIES Pages: 12
D2G TCHKSK43WH User Manual preview
TCHKSK43WH
Brand: D2G Pages: 25
3M MicroTouch Near Field Imaging (NFI) Integration Manual preview
MicroTouch Near Field Imaging (NFI)
Brand: 3M Pages: 40
uControl TouchScreen Installation Manual preview
TouchScreen
Brand: uControl Pages: 75
Aaeon ACP-1076 User Manual preview
ACP-1076
Brand: Aaeon Pages: 75
IBC SOLAR AeroFix Series Installation Instructions Manual preview
AeroFix Series
Brand: IBC SOLAR Pages: 74

Brands by name

Popular brands

Load more brands