Hakko Electronics Monitouch V Series, Reference Manual

Page: 473 / 746

Chapter 17 Animation (V7 Only)
17-18
Structure of Layers
Although animation is placed on the base screen, it actually exists in a different
area. The figure below explains the screen structure.
As shown in the figure above, when you display the overlap while displaying an
animation, be sure to set “with superimpose” for the overlap to be displayed.
If you set “without superimpose,” animation is displayed over the overlap.
Note that when a video, which displays only one channel, is set on the same
screen as an animation, the video is displayed over the animation.
You can place an animation only on the base screen.
(1) Base or video
(more than one display channel)
(2) Overlap or video
(more than one display channel)
(3) Animation
(4) Video (only one display channel)
(5) Overlap
(Superimpose)
Only one overlap can be displayed on the one screen even if you set “with
superimpose.”