Hakko Electronics Monitouch V Series, Reference Manual, Page: 105 / 746

Chapter 3 Switch
3-10
•
For bit-writable memory, you can choose either [Momentary] or [Momentary
W]. For non-bit-writable memory, it is recommended to choose [Momentary
W] for a high-speed processing.
[Draw Mode]
Select [XOR] (Highlight) or [REP] (Replace).
(
For XOR refer to page 4-8. For REP, refer to page 4-11.)
[Function]
Select the function to be provided to the switch, that is, how the switch
should work when it is pressed.
Click the [Modify] button. The [Switch Function] dialog is displayed.
Normal: For basic switch functions common to any switch
Entry: For switches to be linked with a part in entry mode
Sample: For switches to be linked with a part in sampling mode
Memory Card: For switches to be linked with a part in memory card
mode
Memo Pad: Only active when linked to the memo pad mode
Table Data Display: Linked to entry mode when making the table data
display an entry target in entry mode
Digital Switch: For switches to be linked with a numerical data display
part
Video: For switches to be linked with the video function
JPEG: For the switches to call or delete a JPEG file
List of Switch Functions
- Respective switch functions are listed on the following pages.
- When nothing is entered under the “Linked Part” column, the switch
activates alone. When something is entered, the switch will not work
unless a link is established with a corresponding part.
- For more information, refer to the relevant pages.
GD-80 series handles switch output in the unit of words as [Momentary W].
Therefore, if data of GD-80 is imported, it is recommended to choose [Momentary W].