Hakko Electronics Monitouch V Series, Reference Manual

Page: 634 / 746

Chapter 25 Memory Card Mode
25-25
25
M
e
m
o
ry
C
a
rd
M
o
d
e
Setting on the Screen
The following two settings are necessary on the screen.
•
[Overlap Setting]
To call up an overlap on the screen, an overlap setting must be made for the
screen. (Be sure to choose [Multi] for [Type].) For more information on the
overlap setting on the screen, refer to “Chapter 2 Overlap.”
•
Memory Card Mode Setting
- [Key Display Location] in the [Memory Card] dialog
Choose from [OVLP0], [OVLP1], or [OVLP2], for which [Multi] is chosen
in the [Overlap Setting] dialog. Entry keys can be placed only in one
position. (It is not possible to use entry keys on both the base screen and
an overlap in one memory card mode.)
- Switches for Memory Card Mode
[Card No. Edit] [Card Name Edit] [File Name Edit] [Record Name Edit]
When entry keys are placed on a multi-overlap, these four switches work
as “multi-overlap call switches.” Each switch must be equipped with a
multi-overlap number and an MLIB placement position. The setting
procedure of these switches is the same as used for a switch for
[Function: Multi-Overlap].
♦
Placing Entry Keys on Call-Overlap
The setting procedure is almost the same as that for placing on a multi-overlap.
Only the different points are explained.
Setting on the Screen
•
[Overlap Setting]
Choose [Call] in the [Overlap Setting] dialog. An MLIB placement position
must be set.
For more information on the overlap setting on the screen, refer to “Chapter
2 Overlap.”
These items are associated.
When [OVLP0 to OVLP2] is chosen for [Key Display Location] and [OK] is
clicked, the [Overlap (Multi)] dialog is automatically displayed. Set
appropriately, or if not required, click [Cancel].