Hakko Electronics Monitouch V Series, Reference Manual, Page: 729 / 746

Appendix 3 Error
A3-8
32 The number of items that uses the
memory exceeds the available number. Reduce the number of items.
33 The number of switches set on the
screen exceeds the maximum (V7
series/ V608/ V610/ V612: 768, V606/
V606i: 192). Overlap switches and
lamps are included in this number. Reduce the number of switches and
lamps.
34 The items that use the memory
exceeds the available work memory. Reduce the amount of data.
39 The amount of data for one screen
exceeds 256 kbytes (V6: 128 kbytes). Reduce the amount of data.
40* Group byte count error
Contact your local distributor.
41* Recognition flag error
42* Function ITEM error
43* Function ITEM end error
44* Group ITEM end error
45* Offset range over
46 Memory setting error (Unavailable
memory/memory range over) Check the memory setting.
47 The division number of the item limited
to setting on a screen library is
duplicated on a screen. Check the division number and avoid
duplication.
52 Overlap No. error
A number other than 0 to 2 is set. Check the overlap number and set
correctly.
53 In the setting for call-overlap, an
overlap number that is not registered in
multi-overlap edit has been specified. Specify an overlap number registered
in multi-overlap edit.
54 The overlap occupies too much
memory capacity. (Refer to “Chapter 2
Overlap.”) Reset the overlap data size.
55* Multi-overlap header error
Contact your local distributor.
56* Graphic undefined command error
57* Graphic ITEM error
58* Graphic execution error
59* Switch function error
60 Switch operating area error Reset the switch operating area.
61* Statistic graph
%
display No. over
Contact your local distributor.
62* Multi data over
63 The selection order number of data
blocks (a maximum of four) is
duplicated. Check the data block selection order
number and set correctly.
64* Data display element No. error Contact your local distributor.
65 The scale or graph is not set correctly
in the settings for trend graphs or trend
sampling. Correct the settings for both [Scale
Max. Value] and [Scale Min. Value] or
both [Graph Max. Value] and [Graph
Min. Value] in the dialog.
66* Internal circle radius is 0.
Contact your local distributor.
67* The number of trends
≤
0
V7 V6 Error No. Contents Remedies