Hakko Electronics Monitouch V Series, Reference Manual

Page: 711 / 746

Appendix 1 Internal Memory
A1-20
•
Addresses $s436 to 443, 456, 458
The information on the alarm function is stored. For more information, refer
to “Chapter 10 Sampling.”
•
Addresses $s460 to 462
The information on the read area is stored. For more information on the read
area, refer to “Chapter 1 System Setting.”
•
Addresses $s464 to 466
The information on the write area is stored. For more information on the
write area, refer to “Chapter 1 System Setting.”
•
Addresses $s468 to 485
The memory card information (card No./ card name/ file name) is read from
or written to the memory (n).
Use the MOV macro command.
Read: [n = $s468 (to 485)] is executed and the memory “n” is
monitored.
Write: [$s468 (to 485) = n] is executed and data in the memory “n” (to
n + 16) is written into the memory card.
* Data of $s468 to 485 is always “0.”
Example:
1. $u100 = $s468
The memory card number (1 word) is written into $u100.
2. $u101 = $s469
The memory card name (32 characters) is written into $u101 to $u116.
(If the memory card name is less than 32 characters, 32 characters will
be written.)
3. $u117 = $s470
The memory card file name (32 characters) is written into $u117 to
$u132. (If the file name is less than 32 characters, 32 characters will be
written.)
•
Addresses $s490 to 492
The information on V608CH is stored. (
Refer to “Specifications for
V608CH.”)
•
Address $s497
The result of access to the CF card is output.
•
Addresses $s498 to 499
The remaining capacity of the CF card is stored in kbytes.
4 The card is not installed
6 The card size is too small.
7 The card type is different.
12 Writing error
15 Disk error (failed to open)
16 Reading error