Hakko Electronics Monitouch V Series, Reference Manual

Page: 156 / 746

Chapter 5 Data Display
5-17
5
Me
ss
ag
e
D
isp
la
y
Message Display
[Message Display] Dialog
♦
[Main] Tab Window
[Division No.]
Specify the division number. ( For information on the division number,
refer to Chapter 2 in the Reference Manual (Operation).)
[Memory]
One word is occupied by one message number. The message that
corresponds to data contained in the specified memory address is displayed
on the screen.
Register messages in message editing. ( For information on message
editing, refer to Chapter 4 in the Reference Manual (Operation).)
♦
[Char. Prop.] Tab Window
Set the text property. For more information on setting items, refer to “[Char.
Prop.] Tab Window” (page 5-9).
♦
[Detail] Tab Window
[Process Cycle]
Select the desired process cycle. ( Refer to “Appendix 2 Process
Cycle.”)
[ JIS/ASCII] (1-Byte/2-Byte)
Use this item when screen data of the GD-80 series is converted into the V
series format. (
Refer to the File Conversion Manual.)
To call up a message, specify the number in absolute addresses. The
available address range is 0 to 6143. (
For more information on absolute
addresses, refer to “Chapter 6 Message Display (Relay/Message).”)