Hakko Electronics Monitouch V Series, Reference Manual

Page: 281 / 746

Chapter 9 Graphic Display
9-6
[ Graphic]
•
[ Graphic]
Set the [GNo] (Group number = 0 - 9). The graphic displayed on the screen
is limited to a graphic within the specified group number. Specify a graphic
number (0 - 255) in one group in memory.
•
[ Graphic]
Specify the graphic number to be displayed as [Absolute Address]. It is thus
possible to select graphics from more than one group. The range of the
graphic numbers specified in [Memory] is from 0 to 2559.
Display Area Parts
Display area parts are the areas where graphics are displayed in graphic mode.
With [Command: Internal], you must display graphics in display area parts.
♦
[Mode Display Area] Dialog
[Parts Select]
Select display area parts from the parts file.
[Division No.]
Set the same division number as that in the [Graphic] dialog. It thus
becomes associated with the parts used in graphic mode.
[Area Prop.] (Foreground color/background color/tile)
It is possible to change inside properties in display area parts.
[ Display Area Transparent]
This option is not used in graphic mode. Do not check this option.
Absolute addresses of the graphic numbers are as shown below:
Groups are specified separately Absolute address
Group No. Graphic No. Group No. Graphic No.
0 0000 to 0255 (None) 0000 to 0255
1 0000 to 0255 0256 to 0511
2 0000 to 0255 0512 to 0767
3 0000 to 0255 0768 to 1023
4 0000 to 0255 1024 to 1279
5 0000 to 0255 1280 to 1535
6 0000 to 0255 1536 to 1791
7 0000 to 0255 1792 to 2047
8 0000 to 0255 2048 to 2303
9 0000 to 0255 2304 to 2559
With [Command: External], it is possible to display graphics without display
area parts. However, there are instances when the previous picture remains
even after the picture is changed.