Hakko Electronics Monitouch V Series, Reference Manual

Page: 468 / 746

Chapter 17 Animation (V7 Only)
17-13
17
[A
nim
a
ti
on]
Dia
log
[ Move]
Check this box if you want to move the animation. If you uncheck this box,
the animation is displayed in the coordinates location that you specified in
the fields of [Coordinates] within the [Display] field. If you check this box, the
following setting items become active.
[Movement Pattern]
[None]: Move on a straight line path.
[Circle (clockwise): Move on a clockwise circle path.
[Circle (counterclockwise): Move on a counterclockwise circle path.
[Point Count] (In the case of [Movement Pattern: None]: 2 - 32)
[Split]/[
Make it Circle] (In the case of [Movement Pattern: Circle (clockwise/
counterclockwise)]: 2 - 31)
Set the number of the coordinate points or the number of the circumference
partitions.
The following [Display] field describes how to specify the coordinates to
move an animation.
♦
[Display] Field
[Seconds to Replay]/[Seconds to Move] (
×
100 msec)
If you uncheck [ Move], set the time that animation keeps playing in a
display position. If you check [ Move], set the time that the selected
animation number moves.
[Item]/[Coordinates]
If you check [ Move] mentioned above, the items [Item] and [Coordinates]
become active according to the contents you set for [Movement Pattern]. To
set [Coordinates], you can enter a numerical value directly through the
keyboard. You can also use the mouse to specify the moving positions.
(Refer to page 17-14.)
[ New]
This setting is available when you use the mouse to specify the coordinates.
(Refer to page 17-14.) If the coordinates have not been set yet, this box is
checked. If the coordinates have already been set, this box is not checked.
1
2
3
4
5
6
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19 20
Ex.: In case of a straight line
Point count: 6
Ex.: In case of a circle
Split: 20