Hakko Electronics Monitouch V Series, Reference Manual

Page: 149 / 746

Chapter 5 Data Display
5-10
[Char. Type]
Select from the following four text styles.
Normal:
Plain typeface is used.
1/4: 8
×
8 dots
* Available for one-byte characters only
Bold: Bold typeface is used. (The enlargement factor must be “1 : 1.”)
Shadow: Shadowed typeface is used.
[ Transparent]
Check the box if you want to use transparency for the text background.
Transparent Transparent
1234
1234
Foreground color
Background color
Foreground color
With the V6 series:
• Part where transparency should not be used
If the [ Transparent] is checked, renewed data overlaps with the old. If the
[ Transparent] is unchecked, the old data is cleared by the background color and
then data is drawn in the foreground color.
Transparent Transparent
• Part with a painted box on the background
If the [ Transparent] box is checked, the old data is cleared by the painted box
and the data is drawn in the foreground color. Therefore, the new data can be
drawn while the old data does not remain.
Transparent Transparent
When [Shadow] is chosen for [Char. Type], transparency cannot be set. However,
drawing is performed in the same way as [
Transparent]. If no painted box is on
the background, the new data overlaps with the old.
1234
1234 5678
1234
5678
Foreground color
Background color
Foreground color
When data is changed: When data is changed:
1234
5678
1234
5678
Foreground color
Background color
Painted box
When data is changed: When data is changed:
Foreground color
Painted box
In the case of a numerical data display part with painted box, it is recommended that you
specify the box color for the background color ([Char. Prop.] tab window in the [Num.
Display] dialog), and to uncheck [Transparent]. With transparency, flickering will occur
when the displayed data changes. Also the display speed will decrease.