Hakko Electronics Monitouch V Series, Reference Manual, Page: 100 / 746

Chapter 3 Switch
3-5
3
Notes
Switch Area
•
[Detail] tab window of the [Display Environment] dialog
Select [Display]
→
[Display Environment/Change All Display Environment].
The [Display Environment] dialog is displayed.
•
Touch area (switch operating area)
When [Area] is chosen for [Detail Display] in the [Detail] tab window, a dotted
box is shown. This dotted box shows the switch operating area. Pressing in
the switch operating area activates the switch. The area outside the
operating area in the switch is called “part area.” Pressing in this area out of
the touch area does not activate the switch.
•
When you select [DIV No.] in the [Detail] tab window, each switch’s DIV
number is displayed in the lower left, as shown below. When you select
[Memory], the [Output Memory] and [Lamp Memory] set under the switch is
displayed. As with [DIV No.] and [Area], or [Memory] and [Area], two items
can be selected at the same time. ([DIV No.] and [Memory] cannot be
selected at the same time.)
Touch area
(switch operating area)
Part area
DIV No. Memory