Hakko Electronics Monitouch V Series, Reference Manual

Page: 421 / 746

Chapter 13 Macro
13-38
[ OFF Macro Block No.]
This option is valid when [ Start Mem. Designation] is checked. Check this
box when executing the macro block at the edge of [1
→
0] of the start
memory. Specify the macro block number to be executed.
[Process Cycle]
Set a cycle for the V series to read the PLC data while it is communicating
with the PLC. (
Refer to “Appendix 2 Process Cycle.”)
Macro block number
Time-up time
Bit ON
Time
Macro
Start memory
Bit OFF
Execution of ON macro block Execution of OFF macro block
Different macro blocks
This option is useful for clearing the internal memory, etc. that is used for a macro
command.