Hakko Electronics Monitouch V Series, Reference Manual

Page: 475 / 746

Chapter 17 Animation (V7 Only)
17-20
Example of the Animation Setting
The following describes the animation as shown below.
The registration of the animation number and the setting of the [Animation]
dialog on the screen are as shown below:
•
Registration of animation ([Item]
→
[Animation])
- Animation No. 0
(= register panels to move sideways)
Frame: No. 0 - No. 1
Seconds to replay: 1 second
(Changing frame No. 0 and No. 1 and display in 1
second)
- Animation No. 1
(= register panels to move lengthways)
Frame: No. 2 - No. 3
Seconds to replay: 1 second
(Changing frame No. 2 and No. 3 and display in 1
second)
•
Setting animation on the screen
(0 , 50) (400 , 50)
(400 , 480)
Display by setting the bit 0 of D100 to ON
Moving
lengthways in 8
seconds
(V7 series models: VGA)
When it reaches here, the picture is no longer displayed.
Moving sideways in 10 seconds
Register Frame No. 0 and No. 1
in accordance with the setting of
animation No. 0.
Frame No. 0 Frame No. 1
The picture of
walking sideways
Frame No. 2 Frame No. 3
The picture of
walking forwards
Register Frame No. 2 and No. 3
in accordance with the setting of
animation No. 1.
[Main] tab window [Animation Table] tab window
[Command Memory: D100] [0] tab window [1] tab window
[ Replay Animations Consecutively] [Animation No. 0] [Animation No. 1]
[ Use Animation Table] [ Move] [Movement Pattern: None] [ Move] [Movement Pattern: None]
[Point Count: 2] [Point Count: 2]
[Seconds to Move: 100] (
×
100 msec) [Seconds to Move: 60] (
×
100 msec)
[Coordinates] [X0 : 0]
[Y0 : 50]
[X1 : 400]
[Y1 : 50] [Coordinates] [X0 : 400]
[Y0 : 50]
[X1 : 400]
[Y1 : 480]