Chapter 22 Data Logging
22-15
22
W
hen
St
or
ing
to
CREC
:
Memory Card Mode
When using a SRAM memory card (CREC/memory card socket), unless you
format the SRAM memory card into the contents you set in [Memory Card
Setting], you cannot use it. Therefore, you need to set items in the [Memory
Card] dialog in the memory card mode and use the [Function: Card Format]
switch.
If the setting in the [Memory Card] dialog and the [Function: Card Format] switch
are set to the same division, you do not need to set to the same screen as data
logging. For more information on the setting items in the [Memory Card] dialog,
refer to “Chapter 25 Memory Card Mode.”
Setting and Importing Procedures on the V Series
To start data logging, perform the following procedures on the V series:
♦
Note
•
Unless you reset or reformat a SRAM memory card, the data stored on a
SRAM memory card is saved. (However, if the battery of SRAM is low, data
could be lost.)
•
When you remove a SRAM memory card from the V series, sampling is
temporarily stopped and data is not imported. If sampling data is displayed
on the screen, the data is lost. When you reset a memory card, the history of
data imported in the past is displayed and sampling begins again.
Only [Function: Card Format] switch allows you to format SRAM in the
memory card mode.
If you change the settings in the [Memory Card Setting] dialog and [Buffering
Area Setting], you need to reformat. In this case, data is lost.
Connect the V series to the PLC.
Start sampling.
Open the screen where you set the format switch (memory card
mode) and press the format switch.
Immediately after formatting, sampling is possible and data logging
begins.
Perform formatting.
Summary of Contents for Monitouch V Series
