Hakko Electronics Monitouch V Series, Reference Manual, Page: 629 / 746

Chapter 25 Memory Card Mode
25-20
♦
[Memory Card Name] [Memory Card File Name] [Memory Card Record Name]
•
Outline
The memory card, file, and record names in use or currently selected can be
indicated on the screen with the memory manager function.
•
Notes on Setting
[Division No.]
Specify the same division number as in the [Memory Card] dialog.
[Display Function]
Set the character display function. Choose from [Memory Card Name],
[Memory Card File Name], or [Memory Card Record Name]. When the
desired display function is clicked in the memory card mode tool bar, the
function is automatically chosen as default in the dialog to be opened.
[Bytes]
For card, file and record names, it is possible to specify within the range
of 0 to 32. Specify the number appropriate for card, file or record names.
* For record names, [Bytes for Record] is specified for each file in the
[Memory Card] dialog; therefore, select the greatest number of bytes for the
files.
Switches for Memory Manager Function
Switches for file or record selection in the memory card or data transfer from the
PLC to the memory card are available with the memory manager function.
♦
Switch Setting Procedure
The switches used in memory card mode are classified into two categories: the
ones exclusively used in memory card mode and those available in memory
card mode.
Card No. 12 File No. 3 Record No. 6
Card Name ECM File Name Target value Record NameSDY-K
•
Memory card mode tool bar [Memory Card Mode] icon
Format switch
Memory card switches
(1) (Refer to page 25-21.)
(2) to (8) (Refer to page 25-21.)
* [Function] is automatically set.
•
[Function]: (Set the desired function.) [Switch] icon
(9) to (13) (Refer to page 25-21.)
* Be sure to set for [Function].