![background image](http://html1.mh-extra.com/html/hakko-electronics/monitouch-v-series/monitouch-v-series_reference-manual_3315280733.webp)
Appendix 3 Error
A3-12
171
The PLC model set for screen data
does not match the model of the ladder
communication program.
Transfer the ladder communication
program for the PLC model. (Available
with Mitsubishi QnHCPU port (Q) only)
172
A ladder communication program is
stored in the V series though [Ladder
Tool] is not set for [Modular Jack] for
the screen data.
Check [Ladder Tool] for [Modular Jack]
for the screen data.
173
A connection other than [1 : 1] is
selected in the [Comm. Parameter]
dialog though [Ladder Tool] is set for
[Modular Jack] for the screen data.
([1 : 1] must be selected for ladder
transfer.)
When ladder transfer is not performed,
uncheck [Ladder Tool] for [Modular
Jack 1 (or 2)].
To perform ladder transfer, select [1 : 1]
for [Connection] in the [Comm.
Parameter] dialog.
174
UNIPLC is set for the I/F driver.
(Ladder transfer is not supported on the
simulator.)
Uncheck [Use Simulator] in the
[Transfer] dialog before transferring the
screen data.
180
The MODBUS slave communication
program is not found.
Transfer the screen data again.
181
The slave communication program is
stored in the V series though [Modbus
Slave Table is not set for [Modular
Jack] for the screen data.
Select [Modbus Slave Table] for
[Modular Jack] for the screen data.
182
[Modbus Slave Table] and [V-Link] are
selected for [Modular Jack] for the
screen data.
It is not possible to use slave
communication and V-link connection
at the same time.
201*
Total byte count error
Contact your local distributor.
×
202
The setting of [System Setting]
→
[Unit
Setting]
→
[Touch Switch] is not
correct.
Select the touch switch type
appropriate for the V series.
×
203
An item that cannot be used in the
matrix switch type V6 (= memo pad
function) exists.
Delete the item (= memo pad).
204
Manual setting font is not transferred.
Strings equivalent to auto setting font
are displayed correctly, however, if not,
they are tentatively displayed in
12-point font.
Check the manual font setting, and
transfer the screen data again.
205
SRAM cassette is not mounted.
Attach the SRAM cassette.
×
206
Option unit “EU-0
” is not mounted.
Attach the option unit “EU-0
.”
×
207
Option unit “EU-00” is not mounted.
Attach the option unit “EU-00.”
×
208
There is no gateway setting.
To use the e-mail function, be sure to
set gateway on the network table
(Ethernet).
V7
V6
Error No.
Contents
Remedies
Summary of Contents for Monitouch V Series
