Hakko Electronics Monitouch V Series, Reference Manual, Page: 112 / 746

Chapter 3 Switch
3-17
3
[Swi
tc
h] Di
al
og
When bit activation is used as the condition:
[Memory]
Set the memory address for interlock.
[Condition]
Select the condition for [Memory].
[ON]:
When [Memory] is OFF, switch operation is prohibited.
When [Memory] is ON, switch operation is allowed.
[OFF]: When [Memory] is OFF, switch operation is allowed.
When [Memory] is ON, switch operation is prohibited.
[When the switch is OFF] ([Effective]/[Ineffective])
This is valid when [Momentary/Momentary W] is selected for [Output Action].
When you remove your finger from the switch (= when the switch is turned
off), set whether or not the system should determine the condition set above.
[Effective]:
The system determines the condition even when the switch is
OFF. If the condition fails, the switch will not be turned off even
when you remove your finger.
[Ineffective]: The system does not determine the condition when the switch
is OFF.
[ Use Error Buzzer]
Set whether or not an error buzzer sounds when the switch is pressed while
the condition is not met.
[
Use Error Buzzer]: The buzzer will not sound.
[ Use Error Buzzer]: The buzzer will sound.
ON
OFF
ON
ON
OFF ON
OFF
ON
OFF
M1
M1
M1
M1
When the switch is ON: When the switch is OFF:
When the switch is OFF. Effective
When the switch is OFF. Ineffective
Control
panel
[Switch] dialog
• Output Memory M0
• Output Action Momentary
• Interlock
• Memory
M1
• Condition ON
Condition met
Condition met
Condition met
Condition met
Condition not met
Condition met
Ineffective
Ineffective
Lamp OFF graphic Lamp ON graphic
Lamp OFF graphic Lamp ON graphic
Lamp OFF graphic Lamp ON graphic
Lamp ON graphic Lamp ON graphic
Output memory
M0 remains ON.
Output memory
M0 is OFF.
Output memory
M0 is OFF.
Output memory
M0 is OFF.
Control
panel
Press
Release
V series V series
Switch flowchart (page 3-19)