Hakko Electronics Monitouch V Series, Reference Manual, Page: 606 / 746

Chapter 24 SRAM
24-7
24
Se
tti
ngs
for E
a
c
h
Fu
nc
tion
Memory Card Emulation Area
You can use this area as an external memory device (memory manager
function) for a PLC or for sampling data backup (data logging function).
You can use this function not only with SRAM but also with CREC (SRAM
memory card) or CF cards. Therefore, which accessory the data is stored in is
decided by the screen data setting and the accessories attached to the V series.
For more information, refer to “Chapter 25 Memory Card Mode,” “Chapter 22
Data Logging,” or “Chapter 23 CF Card (V7 Only).”
♦
Data Protection When a Power Failure Occurs
When a power failure occurs during writing data to the memory card emulation
area, the data state just before a power failure is always saved in a buffering file,
but the data file is not guaranteed.
♦
Using Memory Card Editor (Option)
Using Memory Card Editor (option), you can read the data stored in the memory
card emulation area from your personal computer, edit data using a spreadsheet
software etc., or write the edited data to the memory card emulation area.