Hakko Electronics Monitouch V Series, Reference Manual

Page: 438 / 746

Chapter 15 Print
15-7
15
S
a
to
’s
Ba
rc
od
e P
rin
te
r MR40
0
Format Table Types
There are two types of format tables. When the MR-400 commands are
registered in this table, desired format or data can be printed.
♦
MR400 Format Table (Register)
Set the print format.
Write these settings on the memory card using the MR_REG macro command.
Once they are written on the memory card, it is not necessary to repeat this step
until the register setting is changed.
♦
MR400 Format Table (Call)
Use the format (register setting), and change the print data. Set the storage
target, type, etc. of the changed data.
Print the data using the MR_OUT macro command.
2D code printing is not supported at present.
The format used in the format table includes settings for digits, position, typeface,
barcode, etc. for MR400.
1 2 3 4 5
1 2 3 4 5 6
0123456789012
ABCDEFGHI
Field No.1
Field No.2
Field No.3
Field No.1
Field No.2
Field No.3
6 6 6 6 6
4953103125773
MONITOUCH
5 5 5 5 5