![background image](http://html1.mh-extra.com/html/hakko-electronics/monitouch-v-series/monitouch-v-series_reference-manual_3315280053.webp)
Chapter 1 System Setting
1-16
•
[Auto 2]
Turns backlight on when bit 11 (backlight) in [Read Area] (screen status
command) is set (1: ON). When bit 11 is reset (0: OFF), the backlight is
turned off after a lapse of the time specified by [Backlight OFF Time] (refer to
[Backlight OFF Time] below) if all the following conditions are raised.
Conditions:
- Bit 11 (backlight) of [Read Area] “n + 1” (screen status command) is reset
(OFF).
- All touch switches are turned off.
•
[Manual]/[Manual 2]
When [Manual] or [Manual 2] is chosen, the backlight is turned on and off by
the [SYSTEM] the [F•5] switch, or by the leading/falling edge of bit
11 in [Read Area] “n + 1.”
* The [SYSTEM] the [F•5] switch is not valid when bit 11 (backlight) in
[Read Area] “n + 1” is set (1: ON).
When [Manual] or [Manual 2] is chosen, [Backlight Power ON Time Control]
(refer to the below) becomes active.
For the difference between [Manual] and [Manual 2], refer to the following
explanation.
[Backlight OFF Time] (sec)
When [Auto 1] or [Auto 2] is chosen, [Backlight OFF Time] becomes active.
When [Auto 1] or [Auto 2] is chosen for [Backlight], the backlight is turned off
after a lapse of a certain time when all the required conditions have been
raised. Specify this time delay.
[Backlight Power ON Time Control]
When [Manual] or [Manual 2] is chosen for [Backlight], this setting item
becomes active.
•
[OFF]
When the V series is turned on, the backlight is off.
•
[ON]
When the V series is turned on, the backlight is on.
[Display] (Normal/Reverse)
This setting is valid for monochrome V series.
Choose whether screen data should be displayed in normal or reverse video
on MONITOUCH. It defaults to [Normal].
Note on Backlight OFF
When [Auto 1], [Auto 2] or [Manual] is selected and the backlight is turned off,
all the touch switches on the V series are not valid, and no switch data will be
output to the PLC. With a touch on any part of the screen, the backlight is
turned back on. However, no switch data will be output even if the touched
part happens to be a switch. The first touch turns the backlight on. Only the
switch operations that are made 500 ms after the backlight is turned on are
written in the PLC. Only for [Manual 2], switches are valid even while the
backlight is off.
Summary of Contents for Monitouch V Series
