Hakko Electronics Monitouch V Series, Reference Manual, Page: 176 / 746

Chapter 6 Message Display (Relay/Message)
6-13
6
Rel
a
y
Mod
e
Displaying Detailed Explanation to Messages
(= Relay-sub function)
It is possible to link relay messages that are displayed by setting bits with
detailed explanation using the relay-sub function. Original relay mode settings
are necessary.
♦
Outline of Relay-Sub Mode
•
Relay-sub mode must be used together with relay mode. Text or graphics
can be called up for one bit of relay mode. For example, this function is
useful for displaying detailed explanation or illustrations corresponding to an
error message.
•
A maximum of four sub-displays can be set up for one-bit of data. Therefore,
supplemental explanations, additional messages or easy-to-see graphics
can be displayed at one time.
[Sub-action: Sub-display] must be selected in the [Relay] dialog.
A
B C
A tank error
B tank error
C tank error
Message by bit ON
= Relay mode
Instructions related to the
message shown on the left
= Relay-sub mode
An error is detected in
tank C.
Stop the machine
immediately, and
check around the tank.
A
B
C
A tank error
B tank error
C tank error
Selected message
Instructions related to
the above message
Illustration related to
the above message