Hakko Electronics Monitouch V Series, Reference Manual, Page: 403 / 746

Chapter 13 Macro
13-20
•
SET_MOVLP
Display a multi-overlap. (Multi-overlap set-up is limited to an internal
command.) When making the displayed multi-overlap off by a macro
command, use the next item, [OVLP_SHOW].
Available Devices
(SET_MOVLP)F1 Multi-overlap setting
•
OVLP_SHOW
This command is available in both a normal overlap and a call overlap.
(Also, only the OFF command is available for a multi-overlap specified to an
internal command.) When executing the ON/OFF command for the overlap,
the overlap is turned ON/OFF.
Available Devices
(SET_MOVLP)F1 Overlap ON/OFF
•
OVLP_POS
This command is available for a normal overlap, a call overlap and a
multi-overlap specified to an internal command. Set the overlap position.
Select [System Setting]
→
[Unit Setting]
→
[Overlap]. The coordinates can
be selected in units of lines, columns, or dots. ( For information on
columns and lines, refer to Chapter 2 in the Reference Manual (Operation).)
Available Devices
(OVLP_POS)F1 Overlap position change
Internal
Memory
PLC
Memory
Constant
Memory
Card
Indirect W Word
F0 Command
name
F1
F1 + 0 Overlap number to be displayed
F1 + 1 Multi-overlap number
F1 + 2 X coordinate for overlap placement
F1 + 3 Y coordinate for overlap placement
Internal
Memory
PLC
Memory
Constant
Memory
Card
Indirect W Word
F0 Command
name
F1
F1 + 0 Overlap number to be displayed
F1 + 1 0:OFF 1:ON
Internal
Memory
PLC
Memory
Constant
Memory
Card
Indirect W Word
F0 Command
name
F1
F1 + 0 Overlap number to be moved
F1 + 1 Destination coordinate X
F1 + 2 Destination coordinate Y