manualshive.com logo in svg

Hakko Electronics Monitouch V Series, Reference Manual, Page: 575 / 746

Share
Download
Hakko Electronics Monitouch V Series Reference Manual Download Page 575

Chapter 23  CF Card (V7 Only)

23-30

2. Specify the drive where the CF card is inserted and click [OK].  The CF Card 

Manager will start.

3. Select [Write to CF Card] from the [File] menu.  The [Write to CF Card] dialog 

is displayed.

4. For [File to be converted], click the [Refer] button and select the [*.V7] that 

you want to write to the CF card.

5. When completing the setting, click [OK].

♦ 

Storage Target on a CF Card

Pattern data is stored in the following folder on the CF card:

Storage target:

\Bitmap

File name:

Bmpxxxx.bin (xxxx: Pattern No.)

Operation on the V7 Series

Insert the CF card, where the pattern data is stored according to the procedure 
mentioned above, into the V7 series.  When displaying the screen, the stored 
pattern data appears.

What is the CF Card Manager?

The CF Card Manager is an application that allows you to write the data used in the V7 
series to a CF card or to convert the data into each file format after importing the data 
stored on a CF card.  For more information, refer to page 23-48.

Summary of Contents for Monitouch V Series











































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments