Hakko Electronics Monitouch V Series, Reference Manual, Page: 637 / 746

Chapter 25 Memory Card Mode
25-28
Setting and Importing Procedures on the V Series
To start the memory manager function, perform the following procedures on the
V series:
If the memory manager function does not work, check the status of [I/F Memory]
set in the [Memory Card Setting] dialog for the screen data file (refer to page
25-11), and take an appropriate action.
Transfer screen data to the V series.
Connect the V series to the PLC.
Format the memory card mode.
Memory manager function ... Available
Open the screen where you set the format switch
(memory card mode) and press the format switch.
Immediately after formatting, the memory manager
function becomes available.