Hakko Electronics Monitouch V Series, Reference Manual

Page: 332 / 746

Chapter 10 Sampling
10-37
10
Dat
a
S
a
mp
ling
[Sample Count]
This option is to be used for data converted from the GD80 series.
Do not use any data other than converted data. (
Refer to the File
Conversion Manual.)
•
[Char. Prop.] Tab Window
[Char. Type]
Choose from [Normal], [1/4], [Bold] or [Shadow].
Normal: One-byte or two-byte characters are used for numerals in
the plain typeface.
1/4:
8
×
8 dots size
* Available for one-byte characters only
Bold: Bold typeface is used.
Shadow: [Background] is used as shadow of [Foreground].
[Foreground]/[Background]
Choose the desired foreground and background colors of numerals.
[ Transparent] [ Italic]
If you want to use transparency or italics, check the corresponding box.
[Char. Size]
Choose either 1-byte or 2-byte characters for displaying numerals.
•
[Detail] Tab Window
[ Use Operation]
Check this box for calculating data in the V series and for displaying its
result. When [
Use Operation] is checked, the mathematical operation
items (offset value, multiplication [
×
]/ division [
÷
], multiplier or divisor)
become active.
* When mathematical operations are used as shown above, their results are
displayed on the screen. Therefore, check the setting for [Display Type],
[Digits], [Decimal Point], etc.
[ Alarm]
If you want to use a different color for data that exceeds or falls short of
the specified range, check the [Alarm] box.
[Max.] and [Min.]
When [ Alarm] is checked, enter [Max.] and [Min.] values.
Characters can be sized up to 1
×
1.
“Offset” is:
like an origin position from which operation of
memory data is started.
Y
X 0
Y = 100 + 2X
100
Offset
Offset