Hakko Electronics Monitouch V Series, Reference Manual, Page: 530 / 746

Chapter 22 Data Logging
22-1
22
Ou
tli
n
e
Outline
•
All data stored in the internal buffer of the V series by sampling (refer to
“Chapter 10 Sampling”) is lost if a power failure occurs. However, if you
store sampling data in “SRAM” or on a “CF card” instead of the internal
buffer, the data is maintained even though a power failure occurs.
•
The settings and import procedures depend on the data storage target.
•
You can also import the sampling data stored in “SRAM” or a “CF card” and
use this data for other applications. When you store the data in SRAM, use
Hakko Electronics’ Memory Card Editor (model: M-CARD SFT). When you
store the data on a “CF card,” you can not only use Memory Card Editor, but
also macro to convert the data into the CSV file format on the V7 series.
This allows you to edit the data immediately using text editing software or
Excel, etc., if the CF card is read from your personal computer.
Data Logging
POWER
F1
F2
F3
F4
F5
F6
F7
SYSTEM
RUN
STOP
PLC
16
MB
Co
m
pa
ctF
las
h
F1
F2
F3
F4
F5
F6
F7
SYSTEM
POWER
Trend Sampling
Power
Effective in sampling mode
Sampling data from the PLC is
stored on a CF card.
Even when a power failure
occurs, data remains on the
memory card.
CF card
or internal SRAM
or SRAM cassette
or CREC
V series