Hakko Electronics Monitouch V Series, Reference Manual, Page: 628 / 746

Chapter 25 Memory Card Mode
25-19
25
M
e
m
o
ry
C
a
rd
M
o
d
e
Data Display for Memory Manager Function
With the memory manager function, it is possible to show the memory card
number and name, file number and name, and record number and name on the
screen. For number display, use numerical data display parts; for name display,
use character display parts.
♦
[Memory Card No.] [Memory Card File No.] [Memory Card Record No.]
•
Outline
The memory card, file, and record numbers in use or currently selected can
be indicated on the screen with the memory manager function.
•
Notes on Setting
[Division No.]
Specify the same division number as in the [Memory Card] dialog.
[Display Function]
Set the numerical data display function. Choose from [Memory Card
No.], [Memory Card File No.], or [Memory Card Record No.]. When the
desired display function is clicked in the memory card mode tool bar, the
function is automatically chosen as default in the dialog to be opened.
[Digits]
•
When [Memory Card No.] is chosen for [Display Function]:
The available card numbers are 0 to 255. Specify in the range of “1” to
“3.”
•
When [Memory Card File No.] is chosen for [Display Function]:
The available file numbers are 0 to 15. Specify in the range of “1” to “2.”
•
When [Memory Card Record No.] is chosen for [Display Function]:
The available record numbers are 0 to 4094. Specify in the range of “1”
to “4.”
If the number of digits less than the above is specified, figures will not be
shown correctly.
Card No. 12 File No. 3 Record No. 6
Card Name ECM File Name Target value Record Name SDY-K