manualshive.com logo in svg

GE Multilin F650, Instruction Manual

Share
Download
GE Multilin F650 Instruction Manual Download Page 628

7-222

F650 DIGITAL BAY CONTROLLER

GEK-106310-AF

7.3 IEC 61850 CONFIGURATOR

CHAPTER 7:  IEC 61850 PROTOCOL

1.

Take into account that if the ICD status is "MODIFIED" or "IN PROGRESS" it is not advisable to switch off the unit 
because the latest settings would not be stored in the unit.

2.

In case that ERROR SG CID is displayed in ICD Status, ensure managed CID has Setting Group enable if  Setting Groups 
function is enable or  ensure managed CID has Setting Group disable if  Setting Groups function is disable.In order to 
allow user to work with correct CID, two default files shall be created in IEC61850 folder when Enervista 650 PC is 
installed.

•

"default_F650SG_v7XX.cid: CID file with setting group option enable

•

"default_F650_v7XX.cid: CID file with setting group option disable.

Figure 7-18:  default CID files

3.

Take into in account that if ERROR HEADER CID value is being displayed in ICD STATUS or ICD STATUS NOT VAL section 
in 

Actual Values > Status > System info

, relay shall not be able to communicate by using IEC 61850 until this 

discrepancy is solved. CID version and firmware version must match in order to get complete functional relay.

Use Setting Group" setting:
The attribute called "Use Setting Group" has been implemented for the IED in the ICD file in order to set if the SGCB is going 
to be available in the relay or not.  

This attribute is not available for firmware versions 7.20 or above. The user shall use proper CID file depending if Setting 
Group function is enabled or disabled.

ICD STATUS NOTVAL

UNKNOWN: No 61850 protocol
ERROR: The CID file in notvalidated is not valid
NOTVALIDATED EMPTY: There is no CID file in notvalidated
PASSED TO VALIDATED: New valid CID file in notvalidated y and 
passed to validated
ERROR HEADER CID: There is a discrepancy in the information about 
product model or firmware version between the firmware of the 
relay and the CID file. If this message is displayed, relay shall not be 
able to communicate by using IEC 61850 until this discrepancy is 
solved. CID version and firmware version must match in order to get 
complete functional relay.

NOTICE

I

Summary of Contents for F650























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands