CHAPTER 6: ACTUAL VALUES
6.2 STATUS
GEK-106310-AF
F650 DIGITAL BAY CONTROLLER
6-29
•
E2PROM Status:
LED associated lights in green if E2PROM is configured and working properly
•
DSP COMM ERROR:
LED associated lights in green if communication error between DSP and main
processor.
•
Magnetic module error:
LED associated lights in green if communication error between DSP and magnetic
module.
•
Plc error:
PLC equations sent to the relay have an error or are incorrect.
•
Net conf error:
Network configuration is incorrect
•
Order code error:
Order code and hardware configuration do not match
•
Total RAM:
Total RAM in the device
•
Used DRAM:
Used RAM in the device
•
Free RAM:
Available RAM in the device
•
UpTime:
DSP heartbeat
•
DSP Counter:
Percentage of CPU in use
•
CPU Usage:
Percentage of CPU in use
•
ICD Status:
Information about status of ICD file stored in the F650. For detailed information go to
Chapter 7, section 7.3.2.2 IEC 61850 CONFIGURATOR FEATURES FOR CONFIGURATION
•
ICD Status NotVal:
Information about validation of new ICD after being sent into the relay. For detailed
information go to Chapter 7, section 7.3.2.2 IEC 61850 CONFIGURATOR FEATURES FOR
CONFIGURATION
•
Dsp Status:
Internal status of the DSP
•
Flash Usage:
FLASH memory in use
•
KINETIS Status:
Kinetis working mode
•
CPU MAX Usage:
Maximum measured CPU usage
•
Temp Current Value:
Current temperature of CPU. This value is displayed in Celsius units.
DSP Counter
CPU Usage
ICD Status
ICD Status NOTVAL
DSP Status
FLASH Usage
KINETICS Usage
CPU Max Usage
Temp Current Value
Temp Max Value
Temp Min Value
Scan Cycle Average
Scan Cycle Rate
PLC Checksum
Settings Checksum
MAC Address
Serial Number
Manufacturer date
Summary of Contents for F650
