GE Multilin F650, Instruction Manual

Page: 322 / 1046

5-170 F650 DIGITAL BAY CONTROLLER GEK-106310-AF
5.9 RELAY CONFIGURATION CHAPTER 5: SETPOINTS
Table 5-94: Active configurable symbols in on-line diagram for graphicalHMI
ACTIVE SYMBOLS
ICONS IN SCREEN
DESCRIPTION
SWITCHGEAR SYMBOLS STANDARD AND IEC 1082-1 SWITCHGEAR SYMBOLS
STANDARD SWITCHGEAR SYMBOLS M and C selection for graphic display option in the order code
Switchgear elements: breaker (square) and selector switch (rhombus),in
vertical and horizontal positions.
It is necessary to associate the figure to its corresponding switchgear
number. The figure is shown filled if the element is closed, and blank if the
element is open. The symbol on the right represents an unpluggable breaker.
In this case it is necessary to indicate which operands show whether the
element is plugged or unplugged. The figure shows also graphically these
two statuses.
IEC SWITCHGEAR SYMBOLS N and D selection for graphic display option in the order code
Breakers and breaker trucks in vertical and horizontal positions.
The first fourth symbols are breakers in vertical and horizontal positions for
left and right options. The last fourth symbols are breaker trucks or
unpluggable breakers. When the device is connected two arrows can be
seen, if the device is not connected only one arrow is displayed. When the
device it is inserted the device can be seen and when it is not inserted only a
blank space is displayed
Contactors in vertical and horizontal positions
Selector switches in vertical and horizontal positions.
OTHER CONFIGURABLE SYMBOLS Available for both M, N, C and D selection
MULTISTATE VARIABLE SYMBOL
Displays a dialog box on screen that is one variable status function (like a
switch case) for the following internal states AR STATUS, AR LOCKOUT MODE,
AR BLOCK MODE and FAULT TYPE.
This type of data allows to visualize the different states of one particular
value, for example, AR STATUS has several states such as (0) OUT OF SERVICE,
(1) READY, (2) LOCKOUT, (3) BLOCK, (4) RECLOSE IN PROGRESS. Significant texts
can be associated with those states.
STATUS SYMBOLS (TEXT AND GRAPHIC MODES):
Bit: Represents the state of an operand by means of a configurable text. It
allows associating a test to the active status and a different text to the
inactive status.
Led(O) Performs the same function in a graphical mode. This way, it works as
a virtual LED. When showing a black circle, it means that the selected
operand is active, and if the circle is blank, the operand is inactive
ANALOG MAGNITUDE SYMBOL
Used for displaying analog magnitudes (current, voltage, power, etc.) in
floating point numbers, such as a current value (123.5 A). Both the number of
decimals and the integer characters can be selected, in order to facilitate the
reading. Any of the analog magnitudes available in the relay can be
configured.