6-28
F650 DIGITAL BAY CONTROLLER
GEK-106310-AF
6.2 STATUS
CHAPTER 6: ACTUAL VALUES
•
E2PROM status:
LED associated lights in green if E2PROM is configured and working properly
•
DSP comm error:
LED associated lights in green if communication error between DSP and main processor.
•
Magnetic module error:
LED associated lights in green if communication error between DSP and magnetic module.
•
Green/Yellow/Orange/Red Zones and Counters:
These 4 counters are referred to the total amount of free RAM available in the device. The
usual state should be Green zone and the rest of indicators means that the device can
have or stop some task just in case that they would need to prioritize the protection task.
•
Kswapd Time:
It should take value always to 0
•
Mtd2 Time:
Time accessing to this partition with Linux OS
•
Mtd3 Time:
Time accessing to this partition with Application
•
CPU Rtai:
Percentage corresponding to protection tasks execution
•
CPU Linux:
Percentage corresponding to rest of linux tasks execution
•
Total RAM:
Total RAM in the device
•
Used DRAM:
Used RAM in the device
•
Free RAM:
Available RAM in the device
•
Chached RAM:
Memory reserved for the Linux OS
•
Up Time:
Second from the last power-up
•
DSP Counter:
It shows that DSP is running
•
ICD Status:
Information about status of ICD file stored in the F650. For detailed information go to
Chapter 7, section 7.3.2.2 IEC 61850 CONFIGURATOR FEATURES FOR CONFIGURATION
•
MAC address:
MAC address assigned to Ethernet ports, Eth_1 and Eth_2.
•
Serial number:
Serial number of the relay that is communicating with Enervista 650 Setup.
•
Manufacturing date:
Date when the relay, connected to Enervista 650 Setup, was assembled.
Table 6-31: System info for firmware versions 7.00 and above
DSP Counter
ICD Status
MAC Address
Serial Number
Manufacturer date
SYSTEM INFO
E2PROM STATUS
DSP COMM ERROR
MAGNETIC MODULE ERROR
PLC ERROR
NET CONF ERROR
ORDER CODE ERROR
Total RAM
Used DRAM
Free RAM
Up Time
Summary of Contents for F650
