CHAPTER 4: INTERFACES, SETTINGS & ACTUAL VALUES
4.1 ENERVISTA 650 SETUP SOFTWARE
GEK-106310-AF
F650 DIGITAL BAY CONTROLLER
4-33
CAUTION
CAREFULLY READ THE FLASH MEMORY UPDATE PROCEDURE DESCRIBED IN SECTION
“BOOT CODE AND FIRMWARE" AND CLOSE ALL RUNNING APPLICATIONS BEFORE
PERFORMING FIRMWARE AND OPERATING SYSTEM UPDATES.
NOTICE
For firmware versions below 7.00, check that the firmware version that is going to be
updated matches the operating system version of the relay before updating firmware. If
not, update the operating system before proceeding to update the firmware. Other
combinations of firmware and operating system different from the listed in section 5 will
not be operative.
For previous version than 7.00 the operating system version is available in the logotype
main screen in HMI; it is the number between brackets in the first line, e.g. F650 1.70 (2.35).
The operating system version is 2.35
NOTICE
*.650 files contain protection, control settings, relay configuration and compiled logic equations. This
file can be retrieved from the relay, using the
File > Get info from relay
option in EnerVista 650 Setup
(through serial or Ethernet communication).
File > Send info to relay
option stores this *.650 file in
the relay.
*.pep, *.aut and *.lib files contain the logic configuration projects necessary to modify the logic
(virtual outputs) in the relay. These files can be stored in the relay, using the
Communication >
Upload info files to relay
option in EnerVista 650 Setup (through Ethernet communication). They can
be retrieved using
Communication > Download info files to relay
option in EnerVista 650 Setup
program (Ethernet communication). Take into account that the *.pep, *.aut and library files are
necessary to modify the PLC logic (virtual outputs). Without these files setting and configuration can
be modified but not logic equations (virtual outputs). It is advisable to use the
Communication >
Upload info files to relay
option to store these logic configuration files into the relay.
*.pep, *.aut and *.lib files contain the logic configuration projects necessary to modify the logic
(virtual outputs) in the relay. These files can be stored in the relay, using the
Communication >
Upload info files to relay
option in EnerVista 650 Setup (through Ethernet communication). They can
be retrieved using
Communication > Download info files to relay
option in EnerVista 650 Setup
program (Ethernet communication). Take into account that the *.pep, *.aut and library files are
necessary to modify the PLC logic (virtual outputs). Without these files setting and configuration can
be modified but not logic equations (virtual outputs). It is advisable to use the
Communication >
Upload info files to relay
option to store these logic configuration files into the relay.
Summary of Contents for F650
