Fagor CNC 8060, Installation Manual

Page: 550 / 698

Installation manual.
CNC 8060
CNC 8065
11.
CON
F
IGUR
ING AN AXIS.
Co
nfigure
a
n
a
x
is a
s
rotary
axis.
·550·
(R
EF
: 1709)
Machine parameter configuration.
Machine parameters MODUPLIM and MODLOWLIM set the module limits for the axis; there
are no travel limits.
Unidirectional rotary axis.
This type of rotary axis only moves in one direction, the one that has been preset for it. The
CNC displays the position values between the limits of the module.
Parameter. Value.
AXISTYPE Rotary.
AXISMODE Module.
UNIDIR No.
SHORTESTWAY No.
LIMIT+
LIMIT- Not used. There are no travel limits.
MODUPLIM
MODLOWLIM Limits of the module. Limits to display the position values.
G90 movements. G91 movements.
The axis moves in the preset direction up to the
programmed position. The axis only admits movements in the preset
direction. The sign of the position value indicates
the moving direction; the absolute position value
indicates the position increment.
Even if the programmed distance is greater than
the module, the axis never turns more than one
revolution. If the programmed distance is greater than the
module, the axis turns more than one revolution.