Fagor CNC 8060, Installation Manual

Page: 264 / 698

Installation manual.
CNC 8060
CNC 8065
2.
MACHINE PA
RAMETERS.
Machine parameters
for kinetics.
·264·
(R
EF
: 1709)
TDATA9
Rest position of the secondary rotary axis.
Possible values: Within ±99999.9999º.
Default value: 0.
The rest position is when the tool is perpendicular to the work plane (parallel to the
longitudinal axis).
TDATA10
Turning direction of the main rotary axis.
Possible values: 0 (by the standard DIN 66217) / 1 (opposite to the standard DIN 66217).
Default value: 0.
See parameter TDATA11.
TDATA11
Turning direction of the secondary rotary axis.
Possible values: 0 (by the standard DIN 66217) / 1 (opposite to the standard DIN 66217).
Default value: 1.
The direction of the XYZ axes, according to the DIN 66217 standard is easy to remember
using the rule of the right hand. On rotary axes, the turning direction is established when
bending your fingers (closing your hand) around the associated linear axis while your thumb
is pointing in the positive direction of the linear axis. On kinematics with rotary axes on the
table, the turning direction is set from the point of view of the tool; therefore, TDATA10 and
TDATA11 must be set to 1.
A
B
TYPE=9
X Y
Z
DATA 5(+)
DATA 2(+)
X
Z
DATA 4(+)
Y
Z
DATA 3(+)
A
B
X Y
Z
DATA 10 = 0
DATA 11 = 0
DATA 10 = 1
DATA 11 = 1