Fagor CNC 8060, Installation Manual

Page: 594 / 698

Installation manual.
CNC 8060
CNC 8065
12.
VOLUMETRIC COMPENSATION.
Variables.
·594·
(R
EF
: 1709)
(V.)MPG.VCOMPAXIS1[tbl]
(V.)MPG.VCOMPAXIS2[tbl]
(V.)MPG.VCOMPAXIS3[tbl]
Variable that can only be read from the program, PLC and interface.
The variable returns the execution value; reading it interrupts block preparation.
Volumetric compensation table [tbl]. Axis to be compensated.
Syntax.
·tbl· Table number.
(V.)MPG.VCOMPFILE[tbl]
Variable to be read via interface.
The variable returns the value of block preparation.
Volumetric compensation table [tbl]. File containing volumetric compensation data.
Syntax.
·tbl· Table number.
12.2.2 Variables. General modifiable signals.
(V.)PLC.VOLCOMP1
··
(V.)PLC.VOLCOMP4
Variable that can be read and written from the interface and read from the program.
The variable returns the execution value; reading it interrupts block preparation.
Report variable (to be used from the scripts).
If the PLC activates one of these marks (changing it from 0 to 1), the CNC activates the
corresponding volumetric compensation (parameter VOLCOMP).
V.MPG.VCOMPAXIS2[1]
Second axis to be compensated in the first volumetric
compensation table.
V.MPG.VCOMPFILE[1]
File for defining the first volumetric compensation.
V.PLC.VOLCOMP1
Volumetric compensation ·1·.
V.PLC.VOLCOMP2
Volumetric compensation ·2·.
V.PLC.VOLCOMP3
Volumetric compensation ·3·.
V.PLC.VOLCOMP4
Volumetric compensation ·4·.