Fagor CNC 8060, Installation Manual, Page: 111 / 698

Installation manual.
CNC 8060
CNC 8065
MACHINE PA
RAMETERS.
2.
Gen
e
ral machin
e parameters.
·111·
(R
EF
: 1709)
GAPCOLLISIONMODE
CNC behavior in the event of a sensor collision.
Possible values: Do not display error / Display error.
Default value: Issue an error.
Associated variable: (V.)MPG.GAPCOLLISIONMODE
The gap control sensor may have a collusion signal connected to the CNC, which should
be managed by the PLC via the GAPCOLLISION mark. If the PLC activates the
GAPCOLLISION mark, the CNC will display an error or not, depending on how this
parameter has been set. The error does not activate the emergency.
GAPTONEG
Movement block in #GAPCTRL to the descending coordinate.
Possible values: Yes / No.
Default value: Yes.
Associated variable: (V.)MPG.GAPTONEG
This parameter indicates whether the movement down from the Z axis to reach the gap is
in a negative direction (normal conditions) or a positive direction (inverted Z axis).
Value. Meaning.
Yes. The positive direction of the Z axis is up and the negative is down (under normal
conditions). The axis moves in the negative direction (down) to reach the gap.
No The positive direction of the Z axis is down and the negative direction is up
(inverted Z axis). The axis moves in a positive direction (down) to reach the gap.
GAPTONEG = Yes GAPTONEG = No
GAP
Z+
LASER
Z-
W O RKPIECE
GAP
Z-
LASER
Z+
W O RKPIECE