Fagor CNC 8060, Installation Manual, Page: 673 / 698

Installation manual.
CNC 8060
CNC 8065
LASER.
16.
Lase
r. Ga
p control.
·673·
(R
EF
: 1709)
16.1.3 Configuring the gap.
Configuring the gap limits.
If the gap exceeds the range defined in the parameters GAPMIN and GAPMAX, the PLC
deactivates the INPOSGAP mark. The CNC will display an error or not, depending on how
the parameter GAPERRORCANCEL has been set. In the event of an error, the CNC stops
the movement of the axes, according to the braking ramp and controlling the gap during the
ramp.
If the axis exceeds the tolerance set in the GAPTOL parameter, the PLC deactivates the
INTOL mark. The CNC will display an error or not, depending on how the parameter
GAPTOLCANCEL has been set. In the event of an error, the CNC stops the movement of
the axes, according to the braking ramp and controlling the gap during the ramp.
Configure the CNC response when exceeding the gap limits.
Parameter. Meaning.
GAPMIN Minimum permitted value for the gap; below this value, the CNC will show
an error or not as defined in the parameter GAPERRORCANCEL.
GAPMAX Maximum permitted value for the gap; above this value, the CNC will
show an error or not as defined in the parameter GAPERRORCANCEL.
This parameter should be lower than GAPDISTLIMIT.
GAPTOL This parameter defines a positioning window on the programmed gap,
to finish the approach block.
Parameter. Meaning.
GAPERRORCANCEL This parameter indicates if the CNC should cancel the error for gap
outside the range, when the gap exceeds the GAPMIN - GAPMAX
range. Regardless of the value of this parameter, the CNC keeps
monitoring the INPOSGAP mark.
GAPTOLCANCEL This parameter indicates if the CNC should cancel the error for gap
outside the tolerance range, when the gap exceeds the margin defined
in the parameter GAPTOL.