Fagor CNC 8060, Installation Manual, Page: 588 / 698

Installation manual.
CNC 8060
CNC 8065
12.
VOLUMETRIC COMPENSATION.
Setup.
·588·
(R
EF
: 1709)
NPOINTSAX1
NPOINTSAX2
NPOINTSAX3
Number of points of the basic volumetric compensation for the
MOVAXIS axis.
Possible values: From 2 to 25 points.
Default value: 10 points.
Associated variable: (V.)MPG.NPOINTSAX1[tbl]
Associated variable: (V.)MPG.NPOINTSAX2[tbl]
Associated variable: (V.)MPG.NPOINTSAX3[tbl]
Parameter included in the VOLCOMP table.
Number of points of basic volumetric compensation on each axis. Each volumetric
compensation axis can have 25 points.
These parameters are only available for basic volumetric compensation; they have no
function in medium and large volumetric compensations.
INIPOSAX1
INIPOSAX2
INIPOSAX3
Initial position of the basic volumetric compensation for the
MOVAXIS axis.
Possible values: Within ±99999.9999 mm / Within ±3937.00787 inch.
Default value: 0.
Associated variable: (V.)MPG.INIPOSAX1[tbl]
Associated variable: (V.)MPG.INIPOSAX2[tbl]
Associated variable: (V.)MPG.INIPOSAX3[tbl]
Parameter included in the VOLCOMP table.
Initial position of the basic volumetric compensation on each axis.
These parameters are only available for basic volumetric compensation; they have no
function in medium and large volumetric compensations.
INCREAX1
INCREAX2
INCREAX3
Interval between points for the MOVAXIS axis in basic volumetric
compensation.
Possible values: Within ±99999.9999 mm / Within ±3937.00787 inch.
Default value: 10 mm / 0.3937 inch.
Associated variable: (V.)MPG.INCREAX1[tbl]
Associated variable: (V.)MPG.INCREAX2[tbl]
Associated variable: (V.)MPG.INCREAX3[tbl]
Parameter included in the VOLCOMP table.
Interval between points on each axis.
These parameters are only available for basic volumetric compensation; they have no
function in medium and large volumetric compensations.
VCOMPAXIS1
VCOMPAXIS2
VCOMPAXIS3
Name of the axis to be compensated.
Possible values: Any axes defined in AXISNAME.
Associated variable: (V.)MPG.VCOMPAXIS1[tbl]
Associated variable: (V.)MPG.VCOMPAXIS2[tbl]
Associated variable: (V.)MPG.VCOMPAXIS3[tbl]
Parameter included in the VOLCOMP table.
These parameters set the axes to be compensated with volumetric compensation. The axes
associated with the same compensation may belong to different channels and they may be
interchanged from one channel to another while the compensation is active. An axis can be
included in several different compensations, but compensations that share axes cannot be
active at the same time.