Fagor CNC 8060, Installation Manual

Page: 110 / 698

Installation manual.
CNC 8060
CNC 8065
2.
MACHINE PA
RAMETERS.
Gen
e
ral machin
e parameters.
·110·
(R
EF
: 1709)
GAPERRORCANCEL
Canceling the gap error outside the range defined by
GAPMIN/GAPMAX.
Possible values: Yes / No.
Default value: No.
Associated variable: (V.)MPG.GAPERRORCANCEL
The GAPERRORCANCEL parameter establishes the CNC behavior when the gap exceeds
the GAPMIN - GAPMAX range. Regardless of the value of this parameter, the CNC keeps
monitoring the INPOSGAP mark.
GAPMIN
Minimum sensor limit.
Possible values: From 0 to 99999.9999 mm / From 0 to 3937.00787 inches.
Default value: 0.
Associated variable: (V.)MPG.GAPMIN
Minimum value permitted for the gap. If the gap exceeds the range defined in the parameters
GAPMIN and GAPMAX, the PLC deactivates the INPOSGAP mark. The behavior of the
CNC depends on the GAPTOLCANCEL parameter.
GAPMAX
Maximum sensor limit.
Possible values: From 0 to 99999.9999 mm / From 0 to 3937.00787 inches.
Default value: 5.0000 mm / 0.19685 inch.
Associated variable: (V.)MPG.GAPMAX
Maximum value permitted for the gap. This parameter should be lower than GAPDISTLIMIT.
If the gap exceeds the range defined in the parameters GAPMIN and GAPMAX, the PLC
deactivates the INPOSGAP mark. The behavior of the CNC depends on the
GAPTOLCANCEL parameter.
GAPTOLCANCEL
Canceling the gap error outside the range defined by GAPTOL.
Possible values: Yes / No.
Default value: No.
Associated variable: (V.)MPG.GAPTOLCANCEL
The GAPTOLCANCEL parameter establishes the behavior of the CNC when the gap
exceeds the margin set in the GAPTOL parameter.
GAPTOL
Error tolerance margin.
Possible values: From 0 to 99999.9999 mm / From 0 to 3937.00787 inches.
Default value: 0.1000 mm / 0.00394 inch.
Associated variable: (V.)MPG.GAPTOL
This parameter defines a positioning window on the programmed gap, to finish the approach
block. If the axis exceeds the tolerance set in the GAPTOL parameter, the PLC deactivates
the INTOL mark. The behavior of the CNC depends on the GAPTOLCANCEL parameter.
Value. Meaning.
Yes. The CNC cancels the out-of-range gap error and does not
stop the movement of the axes.
No The CNC returns an out-of-range gap error and stops the
movement of the axes, according to the braking ramp and
controlling the gap during the ramp.
Value. Meaning.
Yes. The CNC cancels the out-of-tolerance gap error and does
not stop the movement of the axes.
No The CNC returns an out-of-tolerance gap error and stops
the movement of the axes, according to the braking ramp
and controlling the gap during the ramp.