
Installation manual.
CNC 8060
CNC 8065
MACHINE PA
RAMETERS.
2.
Gene
ral
machin
e p
a
rameters. Execu
tio
n
chann
els.
·133·
(R
EF
: 1709)
Description of the types of acceleration.
Square-sine acceleration provides the system's best response. The movements are
smoother and the axis mechanics does not suffer as much. Linear acceleration provides the
poorest response.
However, the smoother the system's response, the slower the movements. Linear
acceleration provides the fastest movements and the square sine the slowest.
The figure below shows the graphs for velocity (v), acceleration graph (a) and jerk (j) for each
case. As acceleration represents the velocity change per time unit, the jerk represents the
acceleration change per time unit.
Parameter SLOPETYPE for the spindle.
The parameter SLOPETYPE does not affect the spindle (M3/M4), which always uses jerk
acceleration (parameters ACCEL/DECEL and ACCJERK/DECJERK). When the spindle
works as a C axis, it will use linear acceleration or jerk acceleration depending on the type
of machining.
IPLANE
Main plane (G17/G18) by default.
Possible values: G17 / G18.
Default value: G17.
Associated variable: (V.)[ch].MPG.IPLANE
This parameter indicates the main work plane assumed by the CNC by default. The axes
that form the work plane depend on machine parameter CHAXISNAME.
Acceleration type.
Spindle as C axis.
Type of machining.
Linear.
El CNC uses the parameters LACC1/LACC2/LFEED.
• Non-HSC Mode (G7/G50/G5) when SLOPETYPE=Linear.
• HSC CONTERROR mode when SLOPETYPE=Linear.
• HSC SURFACE/FAST mode.
Trapezoidal.
El CNC uses the parameters ACCEL/DECEL/ACCJERK/DECJERK.
• Non-HSC Mode (G7/G50/G5) when SLOPETYPE=Trapezoidal.
• HSC CONTERROR mode when SLOPETYPE=Trapezoidal.
Square sine (bell shaped).
El CNC uses the parameters ACCEL/DECEL/ACCJERK/DECJERK.
• Non-HSC Mode (G7/G50/G5) when SLOPETYPE=Square sine.
• HSC CONTERROR mode when SLOPETYPE=Square sine.
Plane.
Abscissa axis.
Ordinate axis.
Longitudinal axis.
G17
CHAXISNAME 1
CHAXISNAME 2
CHAXISNAME 3
G18
CHAXISNAME 3
CHAXISNAME 1
CHAXISNAME 2
t
v
t
a
t
j
t
v
t
a
t
j
t
v
t
a
t
j
LINEAR
TRAPEZOIDAL
SQUARE SINE
Summary of Contents for CNC 8060
