
Installation manual.
CNC 8060
CNC 8065
MACHINE PA
RAMETERS.
2.
Machin
e
parame
ters
for the
axe
s
an
d
spind
les.
·183·
(R
EF
: 1709)
MPGFILTER
Filter time for the handwheel.
Parameter valid for linear and rotary axes and spindles.
Parameter valid for analog drive, Sercos and simulated.
Possible values: From 1 to 1000.
Default value: 10.
Associated variable: (V.)[ch].MPA.MPGFILTER.xn
This filter smoothes the handwheel movements avoiding sudden variations. This parameter
indicates the number of CNC cycles used to are the handwheel pulses read.
JOG MODE. MANUAL INTERVENTION.
MANPOSSW
Maximum positive travel with G201.
Parameter valid for linear and rotary axes and spindles.
Parameter valid for analog drive, Sercos and simulated.
Possible values (1): Within ±99999.9999 mm.
Possible values (2): Within ±3937.00787 inch.
Possible values (3): Within ±99999.9999 degrees.
Default value: 99999.9999 mm / 3937.00787 inch / 99999.9999 degrees.
Associated variable: (V.)[ch].MPA.MANPOSSW.xn
Parameter included in the JOG table.
See axis machine parameters MANNEGSW.
MANNEGSW
Maximum negative travel with G201.
Parameter valid for linear and rotary axes and spindles.
Parameter valid for analog drive, Sercos and simulated.
Possible values (1): Within ±99999.9999 mm.
Possible values (2): Within ±3937.00787 inch.
Possible values (3): Within ±99999.9999 degrees.
Default value: -99999.9999 mm / -3937.00787 inch / -99999.9999 degrees .
Associated variable: (V.)[ch].MPA.MANNEGSW.xn
Parameter included in the JOG table.
When using function G201, Manual mode laid over the Automatic mode, these parameters
indicate how far the axis may be moved in both directions.
MANFEEDP
Maximum % of jog feedrate in G201.
Parameter valid for linear and rotary axes and spindles.
Parameter valid for analog drive, Sercos and simulated.
Possible values: From 0 to 100.
Default value: 20.
Associated variable: (V.)[ch].MPA.MANFEEDP.xn
Parameter included in the JOG table.
See axis machine parameters IPOFEEDP.
Example:
The handwheel has a graduated disk with 100 lines and we would like a feed of 0.001 mm per line
at switch position ·1·.
• A 100-line handwheel provides 1 pulse per line.
MPGRESOL1 = 0.0010 mm.
• A 200-line handwheel provides 2 pulses per line.
MPGRESOL1 = 0.0005 mm.
• A 25-line handwheel provides 1 pulse every 4 lines.
MPGRESOL1 = 0.0040 mm.
Summary of Contents for CNC 8060
