Fagor CNC 8060, Installation Manual

Page: 545 / 698

Installation manual.
CNC 8060
CNC 8065
GENERA
L SETUP.
10.
Config
uration
exa
m
p
les.
·545·
(R
EF
: 1709)
10.2.6 Lathe with 1 channel, 3 axes (1 free) and 1 spindle. Configuration of
"plane" type axes.
The axes and spindles are distributed as follows.
General configuration of the channels, axes and spindles.
Configuration of the axes and spindles of the system.
Configuration of the axes and spindles of channel ·1·.
Plane selection in channel ·1·.
With a plane-type-axis configuration, the G18 plane is always active; in this case the ZX
plane. Functions G17 and G19 are not valid.
Channel ·1·. 3 axes (X Z U) 1 spindle (S).
System Channel ·1·
NCHANNEL = 1 GEOCONFIG = Plane
NAXIS = 3 CHNAXIS = 2
NSPDL = 1 CHNSPDL = 1
IPLANE = G18
AXISNAME Value Logic order. Index in the system.
AXISNAME 1 X Logic number ·1·.
AXISNAME 2 Z Logic number ·2·.
AXISNAME 3 U Logic number ·3·.
SPDLNAME 1 S Logic number ·4·. Spindle with index ·1·.
CHAXISNAME Value Index in the channel. Logic order.
CHAXISNAME 1 X Axis with index ·1·. Logic number ·1·.
CHAXISNAME 2 Z Axis with index ·2·. Logic number ·2·.
CHSPDLNAME Value Index in the channel. Logic order.
CHSPDLNAME 1 S Spindle with index ·1·. Logic number ·4·.
Function Selected plane.
G18 ZX plane Z axis for longitudinal compensation.